Home About Us Clients Contact Us

3 Meter EMC Test Chamber

Panashield's 3 meter EMC anechoic chamber provides a test facility for performing full compliance radiated emissions and radiated immunity testing to various international standards. This proven design has excellent measured results well within the required +/-4 dB NSA levels specified in ANSI C63.4 and EN50147 part 2 (emissions) and is also fully compliant for EN61000-4-3 (immunity). The chambers are self-supporting and constructed using the versatile Panabolt modular panel RF shielding system and provide a high level of shielding integrity.

3 Meter EMC Test Chamber

Nominal Size:  

  • 8.7 m long x 6 m wide x 5.1 m high (5.4 m with raised ground plane reflective floor)

Frequency range:

  • Emissions 30 MHz to 18 GHz / 40 GHz
  • Immunity 26 MHz to 18 GHz / 40 GHz

Standard Features:

  • Self supporting structure
  • Single leaf RF shielded door 1200 wide x 2100 mm high or double leaf door
  • 1800 wide x 2100 mm high
  • Two connector panels with two type N connectors
  • Four waveguide vents 300 x 300 mm
  • 30 amp filters for power
  • 5 amp filters for individual lighting
  • Earth/ground stud
  • Full installation

3 Meter EMC Test Chamber

Absorber Lining:

  • Walls and ceiling covered with ferrite absorber panels
  • Patch of ferrite panels for positioning on floor between EUT and antenna
    for immunity testing.
  • Hybrid absorber on critical area of EUT and antenna end walls
  • Hybrid absorber on critical area of side walls and ceiling
  • Hybrid absorber for placing over an area of the ferrite floor patch

Typical Options:

  • RF shielded control room and also option for amplifier room
  • Larger RF shielded door
  • Raised ground plane floor
  • Integrated turntable, 1.5 m, 2 m or larger
  • Variable height antenna tower/mast
  • Dual controller with fibre optic interface
  • CCTV monitoring system
  • Additional filters
  • RF shielding effectiveness measurement
  • Field Uniformity measurement
  • Normalised site attenuation (NSA) measurement

Standards:

  • EN50157 part 2
  • ANSI C 63.4-2000 SAE 
  • EN55011 / CISPR 11
  • EN55016 / CISPR 16
  • EN55024 / CISPR 22
  • EN / IEC 61000-4-3
  • Various specifications

EMC Chambers

For More Information

Panashield LLC.
9260 Broken Arrow Expressway
Tulsa, OK 74145
(203) 866-5888
help@panashield.com